Slitting shears, up to 2 mm

Chips can be tricky. Just one spiral chip is produced with FEIN slitting shears. The open cutting head also gives you an unobstructed view of the cutting line – for maximum precision and cutting quality. This means that the material is not distorted and remains free of scratches. So you get very clean results when dividing sheet metal, profiles and pipes as cut-offs or cut-outs with little contact pressure. Cornered cuts are also possible.

Technical Data

• Input: 350 W

• Output: 210 W

• Steel up to 400 N/mm²: 2 mm

• Steel up to 600 N/mm²: 1.5 mm

• Steel up to 800 N/mm²: 1.3 mm

• Non-ferrous metals up to 250 N/mm²: 3 mm

• Cutting width: 5 mm

• Rad. of smallest curve: 245 mm

• Immersion Ø: 12 mm

• Cable with plug: 5 m

• Weight: 1.70 kg

• Sound pressure level LpA: 83 dB

• Uncertainty of measured value KpA: 3 dB

• Sound power level LWA: 91 dB

• Uncertainty of measured value KWA: 3 dB

• Sound peak value LpCpeak: 94,8 dB

• Uncertainty of measured value KpCpeak: 3 dB

• Vibration value 1 αhv 3-way: 10,8 m/s²

• Uncertainty of measured value Kα: 1,5 m/s²

• Coil sections: well suitable

• Interior cut-outs: well suitable

• Profile sections: well suitable

• Notches: well suitable